Damp Proofing in Billingham
Extensions such as garage conversions will usually require extra damp proofing to be installed through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will usually be performed by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this may have to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This is performed by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to ensure that your garage conversion incorporates suitable damp proofing methods.