Damp Proofing in Consett
Extensions such as garage conversions will usually require additional damp proofing to be added during the conversion, as the existing garage routinely has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might need to be improved as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is carried out by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it vital to make sure that your garage conversion incorporates suitable damp proofing methods.