Damp Proofing in Rowlands Gill
Extensions including garage conversions will usually require extra damp proofing to be added as part of conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might need to be improved as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This is accomplished by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to make sure that your garage conversion incorporates appropriate damp proofing methods.