Damp Proofing in Northumberland
Extensions such as garage conversions will often require supplementary damp proofing to be added during the conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Additionally, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will often be performed by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may have to be updated as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it important to make sure that your garage conversion employs suitable damp proofing methods.