Damp Proofing in Haltwhistle
Extensions including garage conversions will typically require additional damp proofing to be added through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be performed by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion in order to adhere to current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This can be performed by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it necessary to make sure that your garage conversion makes use of appropriate damp proofing methods.