Damp Proofing in Brampton
Extensions such as garage conversions will often require additional damp proofing to be added through the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not built to be in accordance with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will often be performed by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion in order to meet current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to make sure that your garage conversion employs suitable damp proofing methods.