Damp Proofing in Ambleside
Extensions including garage conversions will usually require extra damp proofing to be added through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be performed by by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is carried out by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion employs suitable damp proofing methods.