Damp Proofing in Windermere
Extensions including garage conversions will usually require extra damp proofing to be installed through the conversion, as the pre-existing garage will often have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be done by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it vital to ensure that your garage conversion incorporates suitable damp proofing methods.