Damp Proofing in Annan
Extensions such as garage conversions will typically require supplementary damp proofing to be installed as part of conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is performed by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it vital to ensure that your garage conversion incorporates appropriate damp proofing methods.