Damp Proofing in Banffshire
Extensions such as garage conversions will typically require supplementary damp proofing to be added through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might need to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This is performed by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, therefore is it necessary to ensure that your garage conversion makes use of appropriate damp proofing methods.