Damp Proofing in Belford
Extensions such as garage conversions will usually require additional damp proofing to be added during the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will often be achieved by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This is performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should adhere to, and so is it vital to ensure that your garage conversion employs suitable damp proofing methods.