Damp Proofing in East Linton
Extensions such as garage conversions will often require additional damp proofing to be added during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will often be achieved by utilising a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be improved as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This is accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, and so is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.
