Damp Proofing in Newton Aycliffe
Extensions such as garage conversions will usually require additional damp proofing to be added through the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this may need to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.