Damp Proofing in Richmond
Extensions such as garage conversions will usually require extra damp proofing to be added through the conversion, as the existing garage will often have a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may have to be improved as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This can be done by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, and so is it necessary to ensure that your garage conversion employs appropriate damp proofing methods.