Damp Proofing in Leyburn
Extensions including garage conversions will typically require extra damp proofing to be added during the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This is done by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, therefore is it vital to make sure that your garage conversion employs appropriate damp proofing methods.