Damp Proofing in Wingate
Extensions such as garage conversions will typically require additional damp proofing to be added during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not built to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. Moreover, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will often be performed by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be updated as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is performed by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should adhere to, and so is it vital to make sure that your garage conversion employs appropriate damp proofing methods.