Damp Proofing in Yarm
Extensions such as garage conversions will typically require supplementary damp proofing to be added as part of conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be performed by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might need to be improved as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This is performed by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, and so is it necessary to ensure that your garage conversion employs suitable damp proofing methods.