Damp Proofing in Bedale
Extensions such as garage conversions will typically require extra damp proofing to be added through the conversion, as the existing garage will often have a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Additionally, the roof of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might need to be improved as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This is carried out by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.