Damp Proofing in Humberside
Extensions such as garage conversions will often require additional damp proofing to be added during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not built to be in accordance with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will in most cases be achieved by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may need to be updated as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This can be done by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, therefore is it important to make sure that your garage conversion employs suitable damp proofing methods.