Damp Proofing in Hull
Extensions such as garage conversions will often require supplementary damp proofing to be installed through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing should be added to walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be updated as part of the conversion in order to comply with current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it vital to ensure that your garage conversion makes use of appropriate damp proofing methods.