Damp Proofing in West Yorkshire
Extensions such as garage conversions will often require supplementary damp proofing to be added during the conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will often be performed by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this may have to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, therefore is it vital to ensure that your garage conversion incorporates suitable damp proofing methods.