Damp Proofing in Ulceby
Extensions such as garage conversions will usually require additional damp proofing to be installed as part of conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roof of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will often be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be done by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, therefore is it important to ensure that your garage conversion incorporates appropriate damp proofing methods.