Damp Proofing in Newark
Extensions including garage conversions will usually require extra damp proofing to be installed during the conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will have to be added to walls and floors. Moreover, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be improved as part of the conversion in order to adhere to current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to ensure that your garage conversion incorporates appropriate damp proofing methods.