Damp Proofing in Hawes
Extensions including garage conversions will often require additional damp proofing to be installed during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be achieved by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this may need to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This is performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, therefore is it vital to ensure that your garage conversion employs suitable damp proofing methods.