Damp Proofing in Oxford
Extensions such as garage conversions will usually require additional damp proofing to be added through the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Moreover, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will often be achieved by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This is performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it vital to ensure that your garage conversion employs appropriate damp proofing methods.