Damp Proofing in Oxfordshire
Extensions including garage conversions will typically require additional damp proofing to be added during the conversion, as the pre-existing garage routinely has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will most likely be performed by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion in order to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This can be performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, and so is it important to ensure that your garage conversion makes use of appropriate damp proofing methods.