Damp Proofing in Hampshire
Extensions including garage conversions will usually require extra damp proofing to be added during the conversion, as the existing garage typically has a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This can be done by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should comply with, and so is it vital to ensure that your garage conversion employs suitable damp proofing methods.