Damp Proofing in Waterlooville
Extensions such as garage conversions will typically require additional damp proofing to be added during the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this might have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be carried out by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to make sure that your garage conversion employs suitable damp proofing methods.