Damp Proofing in East Cowes
Extensions such as garage conversions will typically require extra damp proofing to be installed during the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Moreover, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be updated as part of the conversion in order to comply with current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is done by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.