Damp Proofing in Bampton
Extensions such as garage conversions will often require additional damp proofing to be added as part of conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will often be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls have been damp proofed, but this may need to be improved as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This is performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, and so is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.