Damp Proofing in Newbury
Extensions such as garage conversions will usually require additional damp proofing to be installed as part of conversion, as the existing garage normally has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Furthermore, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this might have to be improved as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to safeguard the brickwork from rotting gradually as moisture sets in. This is carried out by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, and so is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.