Damp Proofing in Pewsey
Extensions such as garage conversions will often require supplementary damp proofing to be added through the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will in most cases be performed by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is done by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, and so is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.