Damp Proofing in Shaftesbury
Extensions such as garage conversions will often require extra damp proofing to be added during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not built to be in accordance with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by employing a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be improved as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, and so is it necessary to make sure that your garage conversion incorporates suitable damp proofing methods.