Damp Proofing in Faringdon
Extensions such as garage conversions will typically require supplementary damp proofing to be installed through the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not designed to be in accordance with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. In addition, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will often be achieved by employing a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may have to be updated as part of the conversion to be able to comply with current building regulations. The walls will need to be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either applying damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, therefore is it important to make sure that your garage conversion incorporates suitable damp proofing methods.