Damp Proofing in Hartlepool
Extensions such as garage conversions will usually require extra damp proofing to be installed as part of conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing should be added to walls and floors. Additionally, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might have to be updated as part of the conversion in order to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is accomplished by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it important to make sure that your garage conversion incorporates appropriate damp proofing methods.