Damp Proofing in Washington
Extensions such as garage conversions will often require additional damp proofing to be added as part of conversion, as the existing garage will often have a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Furthermore, the roof of the garage conversion will require water proofing. The damp proofing of the floor of the garage conversion will most likely be performed by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion to be able to adhere to current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This is done by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should adhere to, therefore is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.