Damp Proofing in Durham
Extensions such as garage conversions will typically require additional damp proofing to be added through the conversion, as the pre-existing garage normally has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may need to be improved as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to adhere to, and so is it necessary to ensure that your garage conversion employs suitable damp proofing methods.