Damp Proofing in Paisley
Extensions such as garage conversions will usually require extra damp proofing to be installed as part of conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not manufactured to be in accordance with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Moreover, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this may have to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting gradually as moisture sets in. This can be performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, and so is it necessary to make sure that your garage conversion employs appropriate damp proofing methods.
