Damp Proofing in West Kilbride
Extensions such as garage conversions will usually require supplementary damp proofing to be added during the conversion, as the existing garage will often have a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Moreover, the roof of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might need to be updated as part of the conversion in order to meet current building regulations. The walls should be damp proofed in order to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion should comply with, therefore is it necessary to ensure that your garage conversion makes use of appropriate damp proofing methods.