Damp Proofing in Dunoon
Extensions including garage conversions will typically require supplementary damp proofing to be installed during the conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Furthermore, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be performed by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is performed by either employing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is a part of the building regulations that the garage conversion should adhere to, therefore is it vital to make sure that your garage conversion employs suitable damp proofing methods.