Damp Proofing in Woolacombe
Extensions such as garage conversions will typically require extra damp proofing to be installed as part of conversion, as the existing garage normally has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might have to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This can be accomplished by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.