Damp Proofing in Beaworthy
Extensions such as garage conversions will usually require supplementary damp proofing to be installed as part of conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will usually be achieved by using a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be placed down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might need to be updated as part of the conversion to be able to adhere to current building regulations. The walls will need to be damp proofed in order to safeguard the brickwork from rotting slowly as moisture sets in. This can be done by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it necessary to ensure that your garage conversion incorporates suitable damp proofing methods.