Damp Proofing in Umberleigh
Extensions including garage conversions will usually require extra damp proofing to be installed through the conversion, as the existing garage normally has a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing should be put into walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by utilising a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have already been damp proofed, but this might need to be updated as part of the conversion to be able to meet current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This can be performed by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion makes use of suitable damp proofing methods.