Damp Proofing in Bideford
Extensions including garage conversions will often require additional damp proofing to be installed through the conversion, as the pre-existing garage will typically have a single skin design for walls and floors, which was not designed to comply with building regulations for habitable rooms. This damp proofing will have to be put into walls and floors. Additionally, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be achieved by utilising a damp proof membrane. This membrane will come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls have been damp proofed, but this might need to be improved as part of the conversion in order to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This can be performed by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is a part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion employs appropriate damp proofing methods.