Damp Proofing in Ferryside
Extensions such as garage conversions will often require extra damp proofing to be added during the conversion, as the existing garage typically has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Moreover, the roof of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by employing a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls have already been damp proofed, but this may have to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed to be able to protect the brickwork from rotting slowly as moisture sets in. This is done by either using damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an integral part of the building regulations that the garage conversion will need to comply with, therefore is it important to ensure that your garage conversion employs appropriate damp proofing methods.