Damp Proofing in Kilmarnock
Extensions such as garage conversions will usually require extra damp proofing to be installed during the conversion, as the pre-existing garage typically has a single skin design for walls and floors, which was not built to comply with building regulations for habitable rooms. This damp proofing will need to be put into walls and floors. Additionally, the roofing of the garage conversion will require water proofing. The damp proofing for the floor of the garage conversion will most likely be performed by using a damp proof membrane. This membrane can come in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, below the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this might have to be updated as part of the conversion to be able to meet current building regulations. The walls will need to be damp proofed to be able to protect the brickwork from rotting gradually as moisture sets in. This is accomplished by either utilising damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already present in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, and so is it vital to make sure that your garage conversion employs suitable damp proofing methods.
