Bricklaying in Broxbourne

Discover Bricklaying Prices in Broxbourne

Home > General Building Projects > Bricklayers > Broxbourne

Bricklaying in Broxbourne

Extensions will typically need brickwork of some form, either to infill the existing gaps or to add insulation to existing brick walls. For some conversions, the garage door is infilled and a brick wall with a couple of windows is added to the front or side of the property.

 

This solid wall will require foundations or lintel supports which may or may not already be present under the existing door. Usually the window will not be a full width to match the existing garage door, so the new brickwork wall will need to take this into account. Depending on the current thickness of the exterior brickwork walls, they may require supplemental insulation. This is usually achieved by adding internal wall insulation like insulated plasterboard, or by adding an additional layer of brickwork to make a cavity wall. These options are again reliant on the existing garage foundations. In addition, if the walls are shared with a neighbouring property, the brickwork will have to comply with building regulations on sound proofing. With all brickwork on garage conversions, it's important to take into account the existing brickwork of the home.

 

Contrary to numerous ideas, a bricklayer actually does more than laying of blocks. There's even more to being a bricklayer than you can probably think about. A single bricklaying projects needs a vast array of skills. Let's look at these skills!

  • Making use of moist resistant materials to seal foundations.
  • Spreading mortar between joints and also using them to serve as a thick layer binding the bricks together in rows.
  • Reading and working from requirements along with strategies.
  • Dealing with brick-cutting devices.
  • Taking charge and also caring for concrete blocks or bricks, clay blocks as well as the sort.
  • Construction of scaffolding - subject to belongings of some licenses in some states.

This is not just an cosmetic choice, as coordinating with existing brickwork is potentially a requirement of planning permission or building regulations in your area. We will offer approximately four Bricklayers pros locally, who will certainly use quotations for the job you want done. You'll receive a property visit from specialists in Broxbourne that'll help you to pick the best Bricklayers for your house before performing the setup. Enter your postcode to start searching currently.

Average Bricklayers cost in Broxbourne

The common cost of Bricklayers is £400. Costs fluctuate based on the materials and the tradesman chosen. The upper price range can be as high as £460. The material costs are in general around £100

Average price per Bricklayers job in 2025

Avg. price low

Avg. price low
£300

Avg. price

Avg. price
£400

Avg. price high

Avg. price high
£460

£600

£450

£300

£150

£0

Prices based on actual Bricklayers costs for Broxbourne, as reported by local LeadsDoWork members.

Bricklayers installation cost in Broxbourne 2025

Labour cost £280
Material cost £100
Waste removal £20
Time frame: 1-10 days

Bricklayers searches in January 2025

Bricklayers Projects in Broxbourne in December 2024

578

Requests for quotations in Broxbourne in December 2024

0

Requests for Bricklayers quotations in Broxbourne in December 2024. 0% change from November 2024.

0

Requests for Bricklayers quotations in Hertfordshire in December 2024. 0% change from November 2024.

Source: Numbers calculated based on the search volumes in major search engines

Bricklayers searches in cities and towns near Broxbourne December 2024

Broxbourne

Broxbourne is a commuter town in Hertfordshire in the East of England with a population of roughly 13,300 in 2001. The town is twinned with Sutera, in Sicily. The name Broxbourne is thought to derive from the Old English words brocc and burna meaning Badger stream. The Manor of Broxbourne is referred to inside the Domesday Book, which mentions Broxbourne Mill. The area was exploited for its gravel and sand extraction in the 20th century. This finally came to an end when the materials had been depleted in the late 1960s leaving lots of water filled lakes. A number of the lakes became part of the Lee Valley Regional Park. Although urbanised with industrial and commercial activity, the area retains a lot of its rural character and is preferred by people commuting to London. The New River which passes by way of the town centre, was dug out in the early 17th century. Broxbourne railway station was constructed in 1840. A terracotta works was opened soon after by James Pulham and Son, who specialised in creating artificial rock gardens; some of their work survives in the gardens at Sandringham House and Buckingham Palace. There are 600 businesses within the borough, with warehousing and distribution sectors being particularly well represented. The employers with more than 250 workers include: Fitzpatrick PLC in Hoddesdon (civil engineers); J Sainsbury, also in Hoddesdon; Marks & Spencer; Turnford Retailers and Merck Sharp & Dohme in Hoddesdon involved in pharmaceutical research. Tesco has its national headquarters at Delamere Road, Cheshunt. The Borough of Broxbourne at Park Plaza Waltham Cross is also the location of the biggest printing plant in the world, which manufactures publications for News International including The Sun, The Times and The Sun on Sunday. For all your house upgrades, make certain that you work with reputable experts in Broxbourne to make sure that you get the top quality service.

Looking for Bricklayers in Broxbourne?

Get free quotes from local builders

Get free quotes

Local & reliable builders near me

Tell us about your bricklayers project

Answer a few quick questions, so we can match you with local builders who can help.

Find up to 4 builders in Broxbourne

Get free, no-obligation local bricklayers quotes from 4 verified builders working in Broxbourne.

Hire with confidence

Compare customer reviews, services and prices, and choose the right tradesperson for you.

Our reviews

Average

Would highly recommend

Would highly recommend, they found me a firm which I was happy with a quote they give me and went ahead and had my job done within 2 days of enquiring.

Good easy way to find a selection of…

Good easy way to find a selection of trades you need all in one place.

Love LeadsDoWork it's a big part of my …

Love LeadsDoWork it's a big part of my Business I would recommend to anyone

FAQs

How much sand do I need for bricklaying?

Sand is a very important element in bricklaying as far as a mortar mix is concerned. Generally, the quality of the sand is the major factor determining the quality of a plaster mix or mortar mix. It’s recommended that the sand should have enough ‘fines’ (- 75 micron material) to get a good plastic mix with a water content that’s less than 350 litres/m3. Generally, a mortar mix or plaster mix is made within the range of one bag of cement to 200 to 300 litres of damp sand.

Apart from experience the next best indicator of the quality of sand is a field test. In other words, if you do not have the required training or experience in bricklaying, the best bet to determine the amount of sand for a good quality mix is by carrying out a field test. Let’s have a look!

• Get about 50kg of sand and air dry it.

• Scoop 25kg of the sand, 5 kg of cement as well as litres of water ( with 1 litre and 1.5 litres of the water in different containers).

• Mix the cement and sand to form a smooth, uniform and consistent colour.

• One after the other, mix the the sand - cement mixture in the three quantities of water. Do this until you’re able to achieve a mix that’s workable enough to use as plaster.

With that done, you should take note that if 5 litres of water is sufficient then the quality and quantity of the sand is perfect. If you’d require 6 litres of water to get a mix workable as a plaster, then both the quality and quantity of the sand is average. However, if you’d need 7 litres of water to get a mix workable as a plaster, then the quality of the sand is poor. Any requirement of water above 7 litres implies a very poor quality of sand.

What is the ratio of sand and cement for bricklaying?

When it comes to laying of bricks, it is essential to get the right mortar mix. It is vital, be it for construction or maintenance projects, so far mortar is required. There are several materials incorporated in getting mortar which includes both cement and sharp sand, soft sand or plasterer’s sand and lots more. Here, we are going to look at the right ratio for cement and sand mix in bricklaying.

Cement include ingredients such as iron, aluminium, as well as silicon and it is mainly used for mortars like aerated cement mortar, Portland cement mortar and gauged mortar. Sand, on the other hand, comes in different forms such as sharp sand, soft sand and plasterer’s sand. The sharp sand consists of a larger grain size than the others and is usually incorporated in the construction areas that requires more strength as well as flexibility. Soft sand is the most common one used in mortar and it’s also referred to as bricklayers’ sand. These are used to make all types of mortar. Finally the plasterer’s sand which neither has the sharp sand’s coarseness nor the fineness of the soft sand, but can also be used for any form of mortar.

Cement and sand mortar is used for a plethora of bricklaying jobs serving as a glue for bricks, walls and pillars, while also repairing or maintaining old listed buildings. The preferred ratio here is 1:3 to 1:5 of cement and building sand. Meanwhile, to get a sand cement mix, essential materials that are required includes water, soft building sand as well as cement. However, you must also note that a sand and cement mortar is not used for structural projects, rather a concrete ratio is used.

What cement should I use for bricklaying?

Cement is a crucial element in bricklaying that’s widely used in both construction as well as finishing works. Generally, they’re used to aerate concrete blocks, connect bricks, prepare plaster, floor levelling as well as the making of precast products. The major reason cement is one of the most common construction materials as its incredible ability to hold structure together. To get a cement plaster, you’d simply have to mix cement with both water and sand. However, when you mix cement with lime, sand and water, you’ll get a mortar.

For cements mortars to be used inside joints, you’ll have to include 1 part cement at the minimum to not more than 2 parts sand by weight which should be dry mixed and moistened with enough water to allow for troweling and packing without falling apart. Generally, the cement sand ratio in a mortar is in between 1:2 to 1:6. The cement and sand mix ratio is largely based on the importance of the project.

Cement provides a plethora of uses in bricklaying and these includes:

• Preparation of cement concrete

• Preparation of cement mortar

• Building fireproof and thermal proof structures

• Building chemical proof structures

• Serving as a grout material

• Building hydrographic and frost resistant structures

• Manufacturing precast members

• Constructing aesthetic concrete

• Constructing cement concrete roads

There are several types of cements with each having its specific purpose. For instance, the type of cement more suited to building a fire proof structure is a high alumnia cement and to build a hydrographic structure, cements like expanding cement, hydrophobic cement, pozzolana cement and quick setting cement are the best bet. Acid resistant cements are more useful in building chemical proof structures, portland cements are best suited to making grout materials, while coloured cements are preferable to building aesthetic structures.

What is a bricklayer?

This is an individual who is trained in the art of working with concrete blocks or bricks, clay bricks as well as other kinds of mortar building materials. In a combination of these materials and good bricklaying skills, a bricklayer can build and repair veneer as well as full brick construction, arches, partitions and other structures.

Contrary to many beliefs, a bricklayer actually does more than laying of bricks. There’s more to being a bricklayer than you can probably think of. A single bricklaying projects requires a wide array of skills. Let’s have a look at these skills!

• Using damp resistant materials to seal foundations.

• Spreading mortar between joints and applying them to serve as a thick layer binding the bricks together in rows.

• Reading and working from specifications as well as plans.

• Working with brick-cutting machines.

• Taking charge and caring for cement blocks or bricks, clay bricks and the likes.

• Construction of scaffolding - subject to possession of some licenses in some states.

A bricklayer mostly works outdoors, in the field and may also work at heights. Depending on the job, a bricklayer can work as part of a team or be in contact with the public. They are mostly recruited by building and construction companies and bricklaying sub contractors. However, they can also set up their own private construction firm or become a self employed tradesperson.

A bricklaying qualification is one of just two construction trades which can continue to become a registered builder. And regardless of the form a bricklaying employment takes, there are certain qualities that makes a really good bricklayer. These includes:

• Ability to work at heights and outdoors

• Enjoy practical work

• Technical aptitude

• Good hand-eye coordination

• Independent and yet a team player too

• Top physical fitness

• Attitude and attendance.

Placholder Image

Other Top Projects in Broxbourne

Customer Reviews

Overall rating:


Broxbourne Bricklayers installers are rated 4.1 out of 5 based on 7 reviews of 67 pros.
The LeadsDoWork rating and review is an overall rating based on verified reviews and feedback from the customers with Bricklayers projects that have been connected with Bricklayers pros to help them. All Bricklayers contractors All Broxbourne Bricklayers contractors

Are you a builder in Broxbourne?

We can help you get more bricklayers work with our qualified job leads and boost your business.

Join today