Damp Proofing in Warwick
Extensions such as garage conversions will often require additional damp proofing to be added through the conversion, as the existing garage typically has a single skin design for walls and floors, which was not manufactured to conform to building regulations for habitable rooms. This damp proofing should be put into walls and floors. In addition, the roofing of the garage conversion will need water proofing. The damp proofing of the floor of the garage conversion will often be achieved by by using a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on whether the floor will be a solid or a floating floor. In a few garages, the walls will have already been damp proofed, but this may have to be improved as part of the conversion in order to meet current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting slowly as moisture sets in. This is done by either implementing damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion will need to adhere to, therefore is it vital to make sure that your garage conversion makes use of appropriate damp proofing methods.