Damp Proofing in Southam
Extensions such as garage conversions will typically require extra damp proofing to be added during the conversion, as the existing garage will typically have a single skin design for walls and floors, which was not designed to conform to building regulations for habitable rooms. This damp proofing will need to be added to walls and floors. Additionally, the roofing of the garage conversion will need water proofing. The damp proofing for the floor of the garage conversion will in most cases be achieved by employing a damp proof membrane. This membrane is available in either solid or liquid form. The damp proof membrane will be put down either on top of the pre-existing concrete floor, underneath the new floor, or as part of both, depending on if the floor will be a solid or a floating floor. In some garages, the walls will have already been damp proofed, but this may need to be improved as part of the conversion to be able to comply with current building regulations. The walls should be damp proofed to be able to safeguard the brickwork from rotting gradually as moisture sets in. This is accomplished by either making use of damp proof membranes, waterproof rendering, or cavity insulation, depending on the type of walls that are already in the garage. Damp proofing is an important part of the building regulations that the garage conversion should comply with, therefore is it necessary to make sure that your garage conversion makes use of suitable damp proofing methods.