uPVC Door in Southam

So you’ve decided to add some new French doors for your home? If yes, then you’re likely going to be concerned about whether or not you’ll require a planning permission to get started.

Properties are compelled to meet certain requirements and have proper permission in place in order to be in line with the regulations. Overall, you’re going to need planning permission in the following situations:

• If you want to construct something new.

• If you want to a make a major change to a building like an extension.

• If you want to change the use of your building such as converting it from residential to commercial.

Getting a new door or replacing an existing one doesn’t usually require a planning permission as it’s one of the less complicated improvements you can make to a home. As a result, this kind of improvement is normally covered by permitted development rights especially when you’re not constructing an extension for which to use the French door. However in the events whereby a permission is needed, it will most likely going to be granted if the proposed changes does not have an impact on the primary elevations of the house which is usually the front of the building.

It’s also important to note that permitted development can be limited by local authorities. These limitations include buildings in a conservation area, listed buildings, and if you happen to reside in an area of immense aesthetic appeal or other designated areas like National Parks. If such situation before you change your French doors, it’s important to consult your local authority before proceeding.

Are you interested in opening up the back of your home during the summer months? Or perhaps you’re just looking for a cool way to beautify your home and add more value to it. Patio doors offer you a great means to achieve your goals and even more so, with a plethora of styles you can choose from. So if you’ve decided to to install patio doors in your home, you’d probably also want to know exactly how much they cost so you can set a budget and start planning.

Generally, depending on the type of patio doors you wish to have installed, be it bifold, French or sliding doors, the price can vary within the range of £400 to £5,000.

There are a number of influencing factors that can play a huge role in the determination of the total cost of patio doors when looking to have them installed. These factors include: the type of patio door, choice of material, size of the door as well as double or triple gazing.

Based on the type of patio door, the cost of various patio door styles are given below:

• Bifold Patio Doors

The cost of bifold doors is usually affected by the material as well as number of panels to be used. The potential cost is usually within the range of £1,200 to £3,000 upwards.

• French Patio Doors

French patio doors when installed with aluminium frames are often very expensive. They’re mostly used with uPVC at the new build homes’ rear in the UK. The potential cost is usually within the range of £800 to £3,000.

• Sliding Patio Doors

These are usually made from aluminium, wood or uPVC. With wood being mostly used for internal doors. The potential cost is usually within the range of £700 to £3,000.

A French door simply means a door style which features two sections that pivots on hinges installed on the door framing’s opposite sides, which opens and closes at the centre. Glass panels are used to make each door’s section covering the middle of the door ( either individual panels that are muntins framed or a single panel of glass). When open, the whole doorway is an open space with no post at the middle. French doors are popular for a number of reasons. Not only do they bring a particular level of charm, class and elegance to your home, but also allow natural light into a room and create a wide opening unlike a sliding patio door. They’re mostly installed at the rear of a home so as to allow for a direct walkway exiting the house and straight into the garden, thereby making your garden even a lot more closer to your home.

There are 3 main types of patio doors which includes the following:

• External or French patio doors

As the name suggests, they’re the French door that leads outside mostly into the garden. Generally when opened, the two door swings outwards, but there are some that can open inwards. They mostly possess a number of large glass panels which enable natural light to brighten up your home.

• Interior

This basically means fitting double French doors between two rooms in a house. This is very similar to the external ones with two doors and also made up of glass panels.

• Sliding

They are very similar to both the external and interior designs but rather than the two doors swinging open, they slide apart to create a great amount of space to walk into the garden. This is the classic charm that sliding French doors provide.

In the past traditional door were usually made from wood and they’re normally good enough at doing the job they were required to do. However, with the advent of far more effective door building materials such as the affordable composites and UPVC, wooden doors are no longer in vogue. Being strong enough to provide the required security for home, low maintenance requirement as well as offering a strong seal and great insulating qualities, both UPVC and composite doors are among the most poplar options available in the market today. So if you’re looking to install a UPVC door in your home or property, you’d probably be wondering how to go about the task. Well, you’ve come to the right place! We’d recommend you hire the services of a professional door installer who can guarantee the best results especially if you lack proper training and experience to complete the job. In this guide, however, you’ll given a good insight into the UPVC door installation process.

• Take the measurement of the entrance to ensure the new door is the right size.

• Remove the old frame and wipe out any old mortar, sealant and any other debris.

• Resting the sill on the brickwork, make use of packers and spirit level to put the new frame in place. Check that the frame is placed the right way with drainage holes at the bottom and also level.

• Once the frame has been successfully put in place, the next line of action is to secure it. To do this, simply drill a hole through the frame. Use a masonry drill through the pilot hole and into the brickwork and ensure a tight fit with the help of packers, then put the anchor into place. Once done, make use of the fixing screw to secure the frame.

• Upon completion, you then have to put the door into place. Make sure the door is toed and heeled so as to avoid unnecessary issues in the future.